PoE 24 cổng 10 / 100Mbps; 2 cổng 10/100 / 1000Mbps; 2 cổng kết hợp mini-GBIC.
Hiệu suất: Công suất chuyển đổi 12,8 Gbps, không chặn, tốc độ chuyển tiếp 9,52 mpps hiệu suất tốc độ dây. QoS: -Mức độ ưu tiên 4: Hàng đợi phần cứng, Lập lịch: Xếp hàng ưu tiên và vòng tròn có trọng số (WRR), gán hàng đợi dựa trên DSCP và lớp dịch vụ (802.1p / CoS). Hiệu suất: Công suất chuyển đổi 12,8 Gbps, không chặn, tốc độ chuyển tiếp 9,52 mpps hiệu suất tốc độ dây.
48-port 10/100Mbps PoE Managed Switch CISCO SF300-48PP (SF300-48PP-K9-EU)
24 port 10/100Mbps PoE; 2 port 10/100/1000Mbps; 2 Combo mini-GBIC ports.
Performance: Switching capacity 12.8 Gbps, nonblocking, Forwarding rate 9.52 mpps wire-speed performance.
Layer 2: Port grouping up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation, Number of VLANs 256 active VLANs (4096 range), Head-of-line (HOL) blocking HOL blocking prevention.
Layer 3: IPv4 routing Wirespeed routing of IPv4 packets, Up to 32 static routes and up to 32 IP interfaces, Classless Inter-Domain Routing (CIDR) support for CIDR.
QoS: Priority levels 4: Hardware queues, Scheduling: Priority queuing and weighted round-robin (WRR), Queue assignment based on DSCP and class of service (802.1p/CoS).
Specifications
|
Performance |
|
|
Ports |
24 x RJ45 Fast Ethernet |
|
2 x RJ45 Gigabit Ethernet |
|
|
2 x RJ45 + SFP Gigabit Ethernet Combo Ports |
|
|
PoE |
24 x RJ45 Fast Ethernet Power Dedicated: 180W |
|
Speed |
Switching Capacity in Gigabits per Second (Gbps): 12.8 |
|
Capacity in Millions of Packets per Second (mpps) with each packet being 64-bytes: 9.52 |
|
|
MAC Address Table Size |
Up to 8000 MAC addresses |
|
Frame Sizes |
Jumbo Frames: Up to 10 KB supported on 10/100 and Gigabit interfaces |
|
Switching Method |
Managed |
|
Layer 2 Switching |
Spanning Tree Protocol (STP): |
|
Standard 802.1d Spanning Tree support |
|
|
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default |
|
|
Multiple Spanning Tree instances using 802.1s (MSTP) |
|
|
Port grouping: |
|
|
Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) |
|
|
Up to 8 groups |
|
|
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation |
|
|
VLAN: |
|
|
Support for up to 256 VLANs simultaneously (out of 4096 VLAN IDs) |
|
|
Port-based and 802.1Q tag-based VLANs |
|
|
MAC-based VLAN |
|
|
Management VLAN |
|
|
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks |
|
|
Guest VLAN |
|
|
Unauthenticated VLAN |
|
|
Voice Lan: |
|
|
Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS |
|
|
Generic VLAN Registration Protocol (GVRP)/ Generic Attribute Registration Protocol (GARP): |
|
|
Protocols for automatically propagating and configuring VLANs in a bridged domain |
|
|
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2: |
|
|
Relay of DHCP traffic to DHCP server in different VLAN. Works with DHCP Option 82 |
|
|
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping: |
|
|
IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups (source-specific multicasting is also supported) |
|
|
IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
|
|
Head-of-line (HOL) blocking: |
|
|
HOL blocking prevention |
|
|
Layer 3 |
IPv4 Routing: Wirespeed routing of IPv4 packets Up to 32 static routes and up to 32 IP interfaces Classless Inter-Domain Routing (CIDR): Support for CIDR DHCP relay at Layer 3: Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay: Relay of broadcast information across Layer 3 domains for application discovery or relaying of BootP/DHCP packets |
|
Security |
Secure Shell Protocol (SSH): SSH secures Telnet traffic to and from the switch; SSH v1 and v2 are supported |
|
Secure Sockets Layer (SSL): SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch |
|
|
IEEE 802.1X (Authenticator role): RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions |
|
|
Supports time-based 802.1X |
|
|
Dynamic VLAN assignment |
|
|
Layer 3 isolation: Allow / disallow routing between IP subnets or directly connected IP networks |
|
|
Layer 2 isolation Private VLAN Edge (PVE) with community VLAN: PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks |
|
|
Port security: Locks MAC addresses to ports, and limits the number of learned MAC addresses |
|
|
RADIUS/TACACS+: Supports RADIUS and TACACS authentication. Switch functions as a client |
|
|
Storm control: Broadcast, multicast, and unknown unicast |
|
|
DoS prevention: DoS attack prevention |
|
|
Congestion avoidance: |
|
|
A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization |
|
|
ACLs: Support for up to 512 rules |
|
|
Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP)/IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag |
|
|
Buttons |
Reset button |
|
LED |
System, Link/Act, PoE, Speed |
|
Memory |
CPU: 128 MB |
|
Flash: 16 MB |
|
|
Buffer |
Packet Buffer: 4 Mb |
|
Fan |
2 pcs |
|
Acoustic Noise |
41.0 dB |
|
MTBF |
241995.9 hours |
|
Certification |
UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
|
Form Factor |
1U |
|
Power Requirements |
100-240V 47-63 Hz, internal, universal |
|
Power Consumption |
110V (219.9W) |
|
220V (213.8W) |
|
|
Dimensions |
44 x 4.44 x 25.7 cm |
|
Weight |
3.73 kg |
- Bảo hành: 12 tháng.
48-port 10/100Mbps PoE Managed Switch CISCO SF300-48PP (SF300-48PP-K9-EU)
24 port 10/100Mbps PoE; 2 port 10/100/1000Mbps; 2 Combo mini-GBIC ports.
Performance: Switching capacity 12.8 Gbps, nonblocking, Forwarding rate 9.52 mpps wire-speed performance.
Layer 2: Port grouping up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation, Number of VLANs 256 active VLANs (4096 range), Head-of-line (HOL) blocking HOL blocking prevention.
Layer 3: IPv4 routing Wirespeed routing of IPv4 packets, Up to 32 static routes and up to 32 IP interfaces, Classless Inter-Domain Routing (CIDR) support for CIDR.
QoS: Priority levels 4: Hardware queues, Scheduling: Priority queuing and weighted round-robin (WRR), Queue assignment based on DSCP and class of service (802.1p/CoS).
Specifications
|
Performance |
|
|
Ports |
24 x RJ45 Fast Ethernet |
|
2 x RJ45 Gigabit Ethernet |
|
|
2 x RJ45 + SFP Gigabit Ethernet Combo Ports |
|
|
PoE |
24 x RJ45 Fast Ethernet Power Dedicated: 180W |
|
Speed |
Switching Capacity in Gigabits per Second (Gbps): 12.8 |
|
Capacity in Millions of Packets per Second (mpps) with each packet being 64-bytes: 9.52 |
|
|
MAC Address Table Size |
Up to 8000 MAC addresses |
|
Frame Sizes |
Jumbo Frames: Up to 10 KB supported on 10/100 and Gigabit interfaces |
|
Switching Method |
Managed |
|
Layer 2 Switching |
Spanning Tree Protocol (STP): |
|
Standard 802.1d Spanning Tree support |
|
|
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default |
|
|
Multiple Spanning Tree instances using 802.1s (MSTP) |
|
|
Port grouping: |
|
|
Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) |
|
|
Up to 8 groups |
|
|
Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation |
|
|
VLAN: |
|
|
Support for up to 256 VLANs simultaneously (out of 4096 VLAN IDs) |
|
|
Port-based and 802.1Q tag-based VLANs |
|
|
MAC-based VLAN |
|
|
Management VLAN |
|
|
Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks |
|
|
Guest VLAN |
|
|
Unauthenticated VLAN |
|
|
Voice Lan: |
|
|
Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS |
|
|
Generic VLAN Registration Protocol (GVRP)/ Generic Attribute Registration Protocol (GARP): |
|
|
Protocols for automatically propagating and configuring VLANs in a bridged domain |
|
|
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2: |
|
|
Relay of DHCP traffic to DHCP server in different VLAN. Works with DHCP Option 82 |
|
|
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping: |
|
|
IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups (source-specific multicasting is also supported) |
|
|
IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router |
|
|
Head-of-line (HOL) blocking: |
|
|
HOL blocking prevention |
|
|
Layer 3 |
IPv4 Routing: Wirespeed routing of IPv4 packets Up to 32 static routes and up to 32 IP interfaces Classless Inter-Domain Routing (CIDR): Support for CIDR DHCP relay at Layer 3: Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay: Relay of broadcast information across Layer 3 domains for application discovery or relaying of BootP/DHCP packets |
|
Security |
Secure Shell Protocol (SSH): SSH secures Telnet traffic to and from the switch; SSH v1 and v2 are supported |
|
Secure Sockets Layer (SSL): SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch |
|
|
IEEE 802.1X (Authenticator role): RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions |
|
|
Supports time-based 802.1X |
|
|
Dynamic VLAN assignment |
|
|
Layer 3 isolation: Allow / disallow routing between IP subnets or directly connected IP networks |
|
|
Layer 2 isolation Private VLAN Edge (PVE) with community VLAN: PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks |
|
|
Port security: Locks MAC addresses to ports, and limits the number of learned MAC addresses |
|
|
RADIUS/TACACS+: Supports RADIUS and TACACS authentication. Switch functions as a client |
|
|
Storm control: Broadcast, multicast, and unknown unicast |
|
|
DoS prevention: DoS attack prevention |
|
|
Congestion avoidance: |
|
|
A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization |
|
|
ACLs: Support for up to 512 rules |
|
|
Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP)/IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag |
|
|
Buttons |
Reset button |
|
LED |
System, Link/Act, PoE, Speed |
|
Memory |
CPU: 128 MB |
|
Flash: 16 MB |
|
|
Buffer |
Packet Buffer: 4 Mb |
|
Fan |
2 pcs |
|
Acoustic Noise |
41.0 dB |
|
MTBF |
241995.9 hours |
|
Certification |
UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
|
Form Factor |
1U |
|
Power Requirements |
100-240V 47-63 Hz, internal, universal |
|
Power Consumption |
110V (219.9W) |
|
220V (213.8W) |
|
|
Dimensions |
44 x 4.44 x 25.7 cm |
|
Weight |
3.73 kg |
- Bảo hành: 12 tháng.
Sản phẩm liên quan
Còn hàng
